Bastone Portable Restroom with Accessible Rampway

Available soon
SKU: MR-BA-A1
  • Mobile Toilets
Regular price $8,740.00
Preorder

Product details

  • Accessible Entry: Checkered plate ramp platform with handrails for wheelchair access
  • Insulated Panels: 2" (50 mm) B2 fire-resistant EPS composite walls and roof
  • Barrier-Free Fixtures: Toilet, corner washbasin, foldable handrail and floor drain included
  • Non-Slip Floor: 1/2" (12 mm) rigid PVC board with an anti-slip, wear-resistant covering
  • Ready Utilities: Concealed wiring, circuit breaker, LED light, power sockets and 1/2" hot and cold water
  • Snow Rated: 125 psf (6 kN/m²) snow load and 40 mph (64 km/h) wind load

Product details

  • Accessible Entry: Checkered plate ramp platform with handrails for wheelchair access
  • Insulated Panels: 2" (50 mm) B2 fire-resistant EPS composite walls and roof
  • Barrier-Free Fixtures: Toilet, corner washbasin, foldable handrail and floor drain included
  • Non-Slip Floor: 1/2" (12 mm) rigid PVC board with an anti-slip, wear-resistant covering
  • Ready Utilities: Concealed wiring, circuit breaker, LED light, power sockets and 1/2" hot and cold water
  • Snow Rated: 125 psf (6 kN/m²) snow load and 40 mph (64 km/h) wind load
Weight1,800 lbs (816 kg)
FrameQ235 steel frame / Steel plate roof / Checkered plate ramp platform / Zinc-rich primer + gray textured powder coating
Wall PanelFire-resistant B2 grade 50 mm EPS foam composite wall panels
RoofFire-resistant B2 grade 50 mm EPS foam composite roof panels
Floor12 mm rigid PVC board + 3 mm anti-slip wear-resistant floor covering
ElectricalConcealed wiring / Circuit breaker / LED light / Power sockets
PlumbingHot & cold water 1/2" / Drainage Ø40 mm / Toilet sewage pipe Ø125 mm
FixturesToilet / Corner washbasin / Foldable barrier-free handrail / Floor drain
Snow Load6 kN/m² (125 psf)
Wind Load40 mph (64 km/h)
Doors & WindowsEPS composite external door / White broken bridge aluminum outward-opening window
FurnitureNone
AccessoriesRamp platform + Handrails

Product manuals and documents

Product_Manual_for_Accessible_Rampway_en_2.pdf

Product_Manual_for_Accessible_Rampway_French.pdf

Shipping

Package dimensions Package weight

FAQ

What hook-ups does the unit need?

A 110 V power supply, a fresh-water supply (1/2" hot and cold inlets) and a drain: a 3" waste outlet to a sewer or septic/holding tank plus a 1" grey-water outlet. A water heater is not included. Have a qualified electrician and plumber make the connections.

Can it be used in winter?

Yes. The units have a steel frame with insulated EPS wall panels and are rated for 6 kN/m² (125 psf) snow. In freezing weather, heat the interior and insulate or heat-trace the supply and drain lines, or drain the unit when it is not in use.

How is it delivered and set up?

Each unit has lifting eyes and forklift pockets and ships by flatbed or freight; you need a forklift or crane on site to set it on a level pad. Shipping is free across Canada. On concrete, fix the four corners with anchors and run wire rope from the anchors to the top corners. In-stock units normally ship within one week; out-of-stock and custom orders take about two to three months.

What is included?

A ceramic toilet with tank, ceramic vanity sink with faucet and paper dispenser; shower models add shower fixtures and a curtain; two-stall models have separate doors. A handicap-accessible model with ramp is also available.

What is the warranty, and are parts available?

One year on the unit. Replacement faucets, tees, sealing rings, drain adapters, door locks and toilets are listed under Parts & Accessories. The original ceramic toilet can be reordered from the factory (about three months) or replaced locally with a rear-outlet toilet with a 7" rough-in.

What if the unit leaks?

Check the water-tank inlet plug and replace it if damaged, then check that the toilet drain pipe is tight. Contact us with photos if the leak continues.

Is it certified?

The two-stall washroom has an ASCE 7-16 structural load assessment (wind 1.40 kN/m², snow 36 to 40.7 psf), the structures carry an EN 1090-1 technical documentation attestation, and the wiring components are UL 758 / CSA C22.2 No. 210 compliant.

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)